Meat & Produce Processing
Commercial Pulp-Separating Juicer with 88mm Feed Chute
Commercial pulp-separating juicer with an 88mm feed chute and a precision steel mesh for juice bars and catering kitchens.
- Feed chute
- 88mm
- Mesh aperture
- 0.45mm
- Voltage
- 220V
- Power
- 550W
- Plug options
- US, two-flat-pin, EU, UK
- Body
- Precision steel
- Exporting since 2013
- Booth 21144, 2F — Yiwu
- Mixed container supported
Ex-factory reference price Price on requestFinal quotation depends on configuration, quantity and destination port.
Overview
This pulp-separating juicer is built for continuous juice service in juice bars, drink shops and catering kitchens. Soft and firm fruit and vegetables go through one machine, and the 88mm wide feed chute takes whole produce with less pre-cutting. The body is precision steel with a precision steel mesh cut at a fine 0.45mm golden angle; 16 shredder rows and an 80° mesh angle leave little pulp fibre behind. A pusher, juice outlet, pulp outlet and a detachable mesh make rinsing simple, while the pure copper motor keeps power steady. The parameter table lists 220V and 550W ratings, with juice yield up to 98% and the mesh lifting yield by 45%. A 110V version is also offered, with US, two-flat-pin, EU and UK plug options for different grids. Choose between the two model sizes by daily output; sizes and full figures are in the specification tables below. Supply and plug can be matched to the destination grid, the unit can be ordered alongside ice-shaving and juicing equipment, and the detail images confirm the configuration before ordering.
Specifications
Core specifications
| Product type | Pulp-separating juicer |
|---|---|
| Configuration | Commercial, high power |
| Applications | Juice bars, drink shops, catering kitchens |
| Feed chute | 88mm |
| Mesh aperture | 0.45mm |
Construction & material
| Body | Precision steel build |
|---|---|
| Mesh and blade | Precision steel mesh, 16 shredder rows, 80° angle |
| Separation | Pulp-juice separation, detachable mesh |
| Motor | Pure copper motor |
Electrical specifications
| Voltage | 220V |
|---|---|
| Supply variant | 110V |
| Frequency | 60HZ |
| Power | 550W |
| Speed | 2800 rpm |
| Plug | US, two-flat-pin, EU and UK plugs available |
Dimensions & weight
| Dimensions (L×W×H) | 43x35x45cm |
|---|---|
| Model A3000 dimensions | 340MM / 360MM / 270MM |
| Model A2000 dimensions | 430MM / 450MM / 350MM |
| Machine weight | 19 kg |
| Juice outlet | 18mm |
- Voltage & plug (matched to destination grid)
- Dimensions (to drawing)
- Colour & logo
Figures are confirmed with your written quotation. Voltage, plug and configuration are built to your market.
Product details
Typical applications
- For Butchery & Meat Processing
- For Food Factory & Central Kitchen
How to choose
Choose meat and produce equipment by throughput and material form: manual sausage stuffers suit small batches and sites without power, electric units suit continuous work. Grinders are sized by hourly output and plate hole diameter; vegetable cutters by the discs supplied (slice / shred / dice) and capacity. Prefer stainless for food-contact parts; cast-iron bodies take impact better but need anti-rust care.
Frequently asked questions
Where is this juicer used?
For continuous juice service in juice bars, drink shops and catering kitchens; one machine handles soft and firm produce.
There are two model sizes — how do I choose?
Choose by daily output; the two sizes are 340MM / 360MM / 270MM and 430MM / 450MM / 350MM, listed in the specification tables below.
Can the supply and plug be matched to my country?
The parameter table lists 220V, with a 110V version also available; US, two-flat-pin, EU and UK plugs are offered — just state your destination grid when ordering.
What is the body made of, and is cleaning simple?
Precision steel body and mesh; the mesh detaches from the body and the pulp and juice outlets rinse clean with water.
Can I order this with other equipment?
It can be ordered alongside ice-shaving and juicing equipment; supply and plug can be matched to the destination grid, with configuration confirmed by the detail images and specification tables.
How do I confirm the configuration before ordering?
Check the mesh, pusher, juice outlet and plug shape in the detail images, then verify 220V, 550W and the model dimensions in the specification tables.