Cold Drink & Dessert Machines
Commercial Cold-Drink Dispenser, 9L Single to Four Tank
Commercial cold-drink dispenser, 9L / 18L / 27L / 36L, one to four tanks, agitating or spraying, cooling-only or hot-and-cold.
- Capacity
- 9L / 18L / 27L / 36L
- Tanks
- One to four tanks
- Voltage
- 110-115V/220-240V
- Frequency
- 50/60Hz
- Power
- 180W / 280W / 380W
- Exporting since 2013
- Booth 21144, 2F — Yiwu
- Mixed container supported
Ex-factory reference price Price on requestFinal quotation depends on configuration, quantity and destination port.
Overview
This commercial cold-drink dispenser serves drink shops and buffet restaurants, holding and dispensing juices and beverages. It comes in one to four tanks, agitating or spraying mixing, and cooling-only or hot-and-cold modes.\n\nA food-grade bowl with a stainless steel body and 304 stainless steel evaporator pan frosts quickly and resists rust; the stainless steel valve is drip-free, with a large drip tray. Quiet design, durable compressor and switches for agitation, cooling, heating and key start.\n\nCapacity by tank count is 9L, 18L, 27L and 36L; voltage 110-115V/220-240V, frequency 50/60Hz, cooling power 180W / 280W / 380W. Net and gross weights and dimensions are in the specification tables below.\n\nChoose tank count by footfall, agitating or spraying by drink type, and cooling-only or hot-and-cold mode; check the valve, evaporator pan and control panel in the detail images. Export power supply and setup can be discussed at selection.
Specifications
Core specifications
| Product type | Commercial cold-drink dispenser |
|---|---|
| Capacity | 9L / 18L / 27L / 36L |
| Tanks | One, two, three, four tanks |
| Beverage type | Beverages |
| Applications | Drink shops, buffet restaurants |
Configuration
| Mixing | Agitating / spraying |
|---|---|
| Mode | Cooling only, hot & cold |
| Material | Stainless steel body, 304 stainless steel evaporator pan, food-grade bowl |
| Dispensing valve | Stainless steel valve, drip-free |
| Control | Agitation, cooling, heating, key start, control switches |
| Drip tray | Large drip tray |
Electrical specifications
| Voltage | 110-115V/220-240V |
|---|---|
| Frequency | 50/60Hz |
| Power | 180W / 280W / 380W |
| Customisation | Export power supply customisation |
Dimensions & weight
| Net weight | 13kg / 23kg / 27kg / 30kg |
|---|---|
| Gross weight | 15kg / 25kg / 29kg / 33kg |
Manufacturer’s original spec sheet — cross-check with the tables above
- Voltage & plug (matched to destination grid)
- Dimensions (to drawing)
- Colour & logo
Figures are confirmed with your written quotation. Voltage, plug and configuration are built to your market.
Product details
Typical applications
- For Dessert / Ice-cream / Bubble Tea
- For Cafe & Coffee Shop
How to choose
Choose cold-drink machines by tank count and per-tank volume: a single tank suits a single flavour on trial, two or three tanks run several flavours in parallel. Slush machines commonly hold 12 L per tank; juice dispensers are chosen by tank count and whether agitation is needed. Ice cream machines split into soft-serve (served straight from the machine) and hard-serve (needs blast freezing, suited to packed retail).
Frequently asked questions
What is this dispenser used for?
It holds and dispenses juices and beverages in one to four tanks, agitating or spraying models, for drink shops and buffet restaurants.
How do I choose capacity and tank count?
Capacity is 9L, 18L, 27L and 36L by tank count; choose one to four tanks by footfall and flavour count.
What are the voltage and frequency?
Marked 110-115V/220-240V and 50/60Hz; export power supply can be discussed at selection.
How do I clean the bowl and body?
A food-grade bowl, stainless steel body, 304 stainless steel evaporator pan and drip-free stainless steel valve, with a large drip tray for daily use.
How do I choose mixing and temperature mode?
Choose agitating or spraying by drink type and cooling-only or hot-and-cold by whether hot drinks are needed; the detail images show the valve, evaporator pan and control switches.